17
D1250U2F Quick Start Guide
Scanning Film
How to Scan Film
Scanning Procedure
1.
Start one of the bundled application programs and start ScanGear CS-U from within it
(see P. 19).
2.
In the [Image Source] category, select [Film].
3.
In the [Film Type] category, select color or black and white, and negative or positive.
4.
Click the [Preview] button.
Select the Image Type or adjust color balance as
required. Higher than 600 dpi of resolution is
recommended when scanning film.
5.
Select the scan area (see P. 13).
• When scanning mounted film, stripes may appear at the upper or lower of the scanned
image. In this case, make sure to select the scan area avoiding stripes.
6.
Click the [Scan] button.
After closing ScanGear CS-U, edit, save or print the image using the application program.
*D1250U2F_QSG_E
11/24/01, 7:19 AM
17
