COPYRIGHT © 1998 CANON INC. CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-11
CHAPTER 3 MECHANICAL SYSTEM
III. FEEDING SYSTEM
A. Pick-Up Roller
1) Remove the body cover.
2) Remove the two screws [1], and detach the
original tray mount [2].
[1]
[2]
[1]
Figure 3-301
3) Remove the screw [3], and detach the
paper retaining solenoid [4].
[4]
[3]
Figure 3-302
4) Remove the two screws [5], and detach the
original inlet guide plate [6].
[5]
[6]
[5]
Figure 3-303
5) Rotate the pick-up roller [7] so that it is as
shown in the figure; then, remove the
screw [8], and detach the pick-up roller.
[8]
[7]
Figure 3-304
