CHAPTER 3 MECHANICAL SYSTEM
3-12
COPYRIGHT © 1998 CANON INC. CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
B. Removing the Separation
Belt Unit
1) Remove the body cover.
2) Detach the reversing roller drive belt [1].
[1]
Figure 3-305
3) Remove the two screws [2], and detach the
separation belt unit [3] together with the
fixing plate [4].
[3]
[2]
[4]
[2]
Figure 3-306
C. Feeding Roller Unit
1) Remove the body cover.
2) Remove the original tray mount.
3) Remove the original inlet guide plate.
4) Remove the separation belt unit.
5) Remove the four screws [5], and detach
the separation guide plate [6].
[5]
[6]
[5]
Figure 3-307
6) Remove the two screws [8], and detach the
inside guide plate [7].
[8]
[7]
[8]
Figure 3-308
