CHAPTER 3 MECHANICAL SYSTEM
3-14
COPYRIGHT © 1998 CANON INC. CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
D. Registration Roller
1) Remove the DADF from the copier.
2) Remove the body cover.
3) Remove the feeding roller unit.
4) Remove the pick-up motor unit.
5) Remove the four screws [2], and detach
the right hinge unit [1].
[2]
[2]
[1]
[2]
Figure 3-313
6) Remove the E-ring [3], and detach the
bush [4].
[4]
[3]
Figure 3-314
7) Remove the screw [5], and detach the
solenoid mount [6].
[5]
[6]
Figure 3-315
8) Remove the spring [7] and the screw [8];
then, detach the arm [9].
[7]
[9]
[8]
Figure 3-316
