CHAPTER 3 MECHANICAL SYSTEM
3-26
COPYRIGHT © 1998 CANON INC. CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
K. Positioning the Paper
Deflecting Solenoid (SL3)
1) Remove the body cover.
2) Loosen the fixing screw [1], and tighten it
when the stroke of the solenoid [2] is 4.5
mm.
[1]
[2]
4.5mm
Figure 3-353
L. Stamp Solenoid
1) Remove the delivery roller unit (top pick-
up mode).
2) Remove the screw [1] and spring [2]; then,
detach the flapper plate [3].
[3]
[1]
[2]
Figure 3-354
3) Remove the E-ring [4] and the bush [5].
[5]
[4]
Figure 3-355
4) Remove the two E-rings [6], gear [7], and
bush [8]; the, detach the delivery roller [9].
(Take care not to drop the pin.)
[6]
[7]
[6]
[8]
[9]
Figure 3-356
