CHAPTER 3 MECHANICAL SYSTEM
3-28
COPYRIGHT © 1998 CANON INC. CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
9) Disengage the two claws [20] of the stamp
solenoid mount [18]; then, detach the
stamp solenoid [19].
[18]
[20]
[19]
Figure 3-361
M. Feeding Belt
1) Remove the body cover.
2) Remove the spring [1] at the front.
[1]
Figure 3-262
3) Free the spring [2] from the hook [3] at the
rear, and engage it on the hook [4]
designed to keep the spring temporarily.
[2]
[4]
[3]
Figure 3-363
4) Remove the two screws [5], and detach the
solenoid [6].
[5]
[6]
Figure 3-364
