CHAPTER 3 MECHANICAL SYSTEM
3-2
COPYRIGHT © 1999 CANON INC.
CANON DADF-B1 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 3-105
Caution:
When mounting the original tray, try
fitting the original retainer [6] into the
pickup side.
2. Removing the ADF
1) Turn off the copier.
2) Disconnect the communication cable of
the ADF from the copier.
3) Open the ADF fully.
4) Remove the two screws.
Figure 3-107
5) Shift the ADF to the rear, and lift the ADF
by holding it with both your hands.
Caution:
The foot of the hinge is equipped with a
locking mechanism, requiring you to
open the ADF fully when detaching it
from the copier.
[6]
Figure 3-106
[1]
