CHAPTER 3 MECHANICAL SYSTEM
3-12
COPYRIGHT © 1999 CANON INC.
CANON DADF-B1 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
4) Move down the separation roller holder in
the direction of the arrow [A], and pull the
separation roller unit to the front.
Figure 3-304
5) Remove the E-ring [5] used to keep the
shaft in place, and pull off the shaft pin [6].
Then, pull off the shaft [7], and detach the
separation roller [8].
Figure 3-305
C. Removing the Pickup Roller
1) Remove the separation unit. (See A.
“Removing the Pickup Roller.”)
2) Remove the E-ring [1] used to keep the
shaft in place.
Then, pull off the shaft [2], and detach the
pickup roller [3].
Figure 3-306
[7]
[A]
[5]
[6]
[8]
[7]
[3]
[2]
[1]