CHAPTER 5 TROUBLESHOOTING
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON DADF-H1 REV.0 MAR. 2001
5-4
[If out of tolerances]
1) Loose two knurled screws [1] in the
front part of the right hinge unit.
2) Move the right hinge unit back and
forth for adjustment.
3) When the adjustment is completed,
tighten two knurled screws [1] to secure
the right hinge unit in position. Figure
3B-1
F05-101-05
4) Print the test chart again to make sure
that the image falls within tolerances of
the specifications.
1.1.3 Scanning position adjustment
This adjustment adjusts the flow-scanning
position on the host in relation to the scan-
ning position on the ADF.
First, perform automatic adjustment
Perform automatic adjustment first, and if it
fails, try manual adjustment.
a. Automatic adjustment
1) Turn on the power to the host to invoke
service mode.
2) Press
, 2 and 8 concurrently, and
then
to invoke service mode.
3) Starting from the service mode screen,
touch the following screens in this or-
der:
COPIER > FUNCTION > INSTALL >
STRD-POS
Summary of Contents for DADF-H1
