manualshive.com logo in svg

Canon DADF-P1, Service Manual

The Canon DADF-P1 Service Manual is a comprehensive user manual that provides step-by-step instructions for ensuring optimal performance and maintenance of the Canon DADF-P1 product. Download this manual for free from our website and discover valuable insights to enhance your experience with this exceptional Canon device.

Share
Download
background image

Contents

3.4.5.5 

Removing the Feed Motor

............................................................................................................... 3- 8

3.4.5.6 

Removing the Timing Belt

............................................................................................................... 3- 9

3.4.5.7 

Removing the Document Tray

........................................................................................................ 3- 9

3.4.5.8 

Removing the Feeding Unit

............................................................................................................. 3- 9

3.4.5.9 

Removing the Platen Roller Unit

.................................................................................................... 3- 9

3.4.5.10 

Removing the Read Roller 2

....................................................................................................... 3- 10

3.4.5.11 

Removing the Sensor Unit in the Feeder Unit

......................................................................... 3- 10

3.4.5.12 

Removing the Lower Registration Roller

.................................................................................. 3- 10

3.4.6 

Delivery Reversing Roller (upper)

....................................................................................................... 3- 11

3.4.6.1 

Removing the Front Cover

............................................................................................................ 3- 11

3.4.6.2 

Removing the Feeder Cover

......................................................................................................... 3- 11

3.4.6.3 

Removing the Rear Cover

............................................................................................................. 3- 11

3.4.6.4 

Removing the ADF Driver PCB

.................................................................................................... 3- 11

3.4.6.5 

Removing the Pickup Motor

.......................................................................................................... 3- 11

3.4.6.6 

Removing the Feed Motor

............................................................................................................. 3- 12

3.4.6.7 

Removing the Timing Belt

............................................................................................................. 3- 12

3.4.6.8 

Removing the Document Tray

...................................................................................................... 3- 12

3.4.6.9 

Removing the Feeding Unit

........................................................................................................... 3- 13

3.4.6.10 

Removing the Upper Delivery Reversing Roller

...................................................................... 3- 13

3.4.7 

Read Roller 1

.......................................................................................................................................... 3- 13

3.4.7.1 

Removing the Front Cover

............................................................................................................ 3- 13

3.4.7.2 

Removing the Feeder Cover

......................................................................................................... 3- 13

3.4.7.3 

Removing the Rear Cover

............................................................................................................. 3- 14

3.4.7.4 

Removing the ADF Driver PCB

.................................................................................................... 3- 14

3.4.7.5 

Removing the Pickup Motor

.......................................................................................................... 3- 14

3.4.7.6 

Removing the Feed Motor

............................................................................................................. 3- 14

3.4.7.7 

Removing the Timing Belt

............................................................................................................. 3- 14

3.4.7.8 

Removing the Document Tray

...................................................................................................... 3- 15

3.4.7.9 

Removing the Feeding Unit

........................................................................................................... 3- 15

3.4.7.10 

Removing the Read Roller 1

....................................................................................................... 3- 15

3.4.8 

Read Roller 2

.......................................................................................................................................... 3- 16

3.4.8.1 

Removing the Front Cover

............................................................................................................ 3- 16

3.4.8.2 

Removing the Feeder Cover

......................................................................................................... 3- 16

3.4.8.3 

Removing the Rear Cover

............................................................................................................. 3- 16

3.4.8.4 

Removing the ADF Driver PCB

.................................................................................................... 3- 16

3.4.8.5 

Removing the Pickup Motor

.......................................................................................................... 3- 16

3.4.8.6 

Removing the Feed Motor

............................................................................................................. 3- 17

3.4.8.7 

Removing the Timing Belt

............................................................................................................. 3- 17

3.4.8.8 

Removing the Document Tray

...................................................................................................... 3- 17

3.4.8.9 

Removing the Feeding Unit

........................................................................................................... 3- 18

3.4.8.10 

Removing the Read Roller 2

....................................................................................................... 3- 18

3.4.9 

Platen Roller

............................................................................................................................................ 3- 18

3.4.9.1 

Removing the Front Cover

............................................................................................................ 3- 18

3.4.9.2 

Removing the Feeder Cover

......................................................................................................... 3- 19

3.4.9.3 

Removing the Rear Cover

............................................................................................................. 3- 19

3.4.9.4 

Removing the ADF Driver PCB

.................................................................................................... 3- 19

3.4.9.5 

Removing the Pickup Motor

.......................................................................................................... 3- 19

3.4.9.6 

Removing the Feed Motor

............................................................................................................. 3- 19

3.4.9.7 

Removing the Timing Belt

............................................................................................................. 3- 19

Summary of Contents for DADF-P1



























































































Reviews:

No comments

Related manuals for DADF-P1

Canon CX-G2400 Basic Operation Manual preview
CX-G2400
Brand: Canon Pages: 58
Canon image Prograf iPF680 Series Basic Manual preview
image Prograf iPF680 Series
Brand: Canon Pages: 132
Canon i470D Series Printing Manual preview
i470D Series
Brand: Canon Pages: 44
Canon imageClass LBP6230dw Getting Started preview
imageClass LBP6230dw
Brand: Canon Pages: 16
Canon i960 Series Printing Manual preview
i960 Series
Brand: Canon Pages: 2
Canon imageprograf IPF785 Service Manual preview
imageprograf IPF785
Brand: Canon Pages: 42
Canon CX 320 User Manual preview
CX 320
Brand: Canon Pages: 148
Canon Color Bubble Jet BJC-8200 Quick Start Manual preview
Color Bubble Jet BJC-8200
Brand: Canon Pages: 6
Canon Color Bubble Jet BJC-1000 Series Specification preview
Color Bubble Jet BJC-1000 Series
Brand: Canon Pages: 2
Canon BJC-S530D Start Here preview
BJC-S530D
Brand: Canon Pages: 2
Canon BJC-S520 Setup Instructions preview
BJC-S520
Brand: Canon Pages: 2
Canon Color Bubble Jet BJC-8200 Service Manual preview
Color Bubble Jet BJC-8200
Brand: Canon Pages: 105
Canon i9900 Series Start Here preview
i9900 Series
Brand: Canon Pages: 2
Canon i900D Series Quick Start Manual preview
i900D Series
Brand: Canon Pages: 68
Canon i900D Series Printing Manual preview
i900D Series
Brand: Canon Pages: 4
Canon i900D Series Setup Instructions preview
i900D Series
Brand: Canon Pages: 2
Canon i80 Series Setup Instructions preview
i80 Series
Brand: Canon Pages: 2
Canon imagePROGRAF iPF830 Setup Manual preview
imagePROGRAF iPF830
Brand: Canon Pages: 16

Brands by name

Popular brands

Load more brands