Trouble?
105
Ad
di
tio
n
al In
for
m
ati
o
n
Direct Print Related Messages
NOTES
About Canon PIXMA/SELPHY DS Printers:
If the printer’s error indicator flashes or an error message
appears on the printer’s operation panel, refer to the printer’s instruction manual.
TOO MANY STILL IMAGES
DISCONNECT USB CABLE
Disconnect the USB cable and decrease the number of still images
on the memory card or disc to less than 1800. Images cannot be
erased from a DVD-R/DVD-R DL or DVD-RW disc recorded in
VIDEO mode.
If a dialog appeared on the computer screen, close it and then
reconnect the USB cable.
–
COPYRIGHT PROTECTED
DUBBING RESTRICTED
You attempted to record copyright-protected contents.
May also appear when an anomalous signal is received while
recording form the analog video input.
82
Message
Explanation
PAPER ERROR
There is a problem with the paper. The paper is not correctly loaded or the
paper size is wrong.
Alternatively, if the paper output tray is closed, open it to print.
NO PAPER
Paper is not correctly inserted or there is no paper.
PAPER JAM
The paper jammed during printing. Select [STOP] to cancel printing. After
removing the paper, set some paper again and retry printing.
INK ERROR
There is a problem with the ink.
NO INK
The ink cartridge is not inserted or is out of ink.
LOW INK LEVEL
The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart
printing.
INK ABSORBER FULL
Select [CONTINUE] to resume printing. Consult a Canon Service Center
(refer to the list included with the printer) to replace the ink absorber.
• FILE ERROR
• CANNOT PRINT!
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
COULD NOT PRINT X
IMAGES
You attempted to use the print order settings to print X images that were
recorded with another camcorder, with a different compression or were
edited on a computer.
SET PRINT ORDER
No still image on the memory card has been marked with a print order.
PRINT ORDER ERROR
You attempted to set more than 998 still images in the print order.
CANNOT TRIM
You attempted to trim an image that was recorded with another camcorder.
READJUST TRIMMING
You changed the print style after you set the trimming settings.
PRINTER ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the error still persists, refer to the printer’s instruction manual and
contact the appropriate customer support center or service center.
Message
Explanation
D119_NTSC-E.book Page 105 Monday, December 18, 2006 10:14 AM
