Before Using the Scanner
7
Chap
te
r 1
■
When cleaning the scanner, turn the power switch OFF and
disconnect the power cord from the power supply.
■
Clean the scanner using a slightly dampened cloth which has
been well wrung out. Never use alcohol, benzene, paint thinner, or
any other flammable substances.
■
If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the machine, immediately turn
the power switch OFF, and disconnect the power plug from the
power outlet. Then, contact your local authorized Canon dealer or
the service representative for further information.
■
Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately turn the
power switch OFF, and disconnect the power plug from the power
outlet. Then, contact your local authorized Canon dealer or service
representative to have the unit serviced.
■
Before moving the scanner, be sure to turn the power switch OFF,
and disconnect the power plug from the power outlet.
CAUTION
■
Do not install the scanner on a surface that is unstable or tilted, or
in an area subject to excessive vibrations, as this may cause the
scanner to fall, resulting in personal injury or damage to the
scanner.
■
Do not block ventilation openings. Doing so could case the
scanner to overheat, creating a risk of fire.
■
Never place small metal objects such as staples, paper clips, or
jewelry on the scanner. These items may fall into the scanner, and
cause a fire or electric shock. Should such objects ever fall inside
the scanner, immediately turn the power switch OFF, and
disconnect the power plug from the power outlet. Then, contact
your local authorized Canon dealer or service representative to
have the unit serviced.
■
Do not install the scanner in a humid or dusty location. Doing so
might cause a fire or electric shock.
■
Do not place objects on top of the scanner. Such objects may tip
or fall over, resulting in personal injury.
■
When unplugging the power cord, grasp it firmly by its plug. Do
not pull directly on the power cord, as this may damage or expose
the cord’s internal wiring, resulting in a fire or electric shock.
