COUNT ONLY
MODE
In this mode, documents are fed through the scanner and counted,
not scanned. To use this mode, press the Count Only key on the
operation panel. Then place a batch on the document tray and press
the Start key. The number of pages in the batch will appear in the
counter display.
8
▲
PATCH CODE
SHEETS
The scanner can recognize sheets of
paper with patch codes printed on
them. This allows files to be separated
without interrupting the scan. Two patch
code patterns are provided.
▲
DOUBLE FEED
DETECTION
This function automatically detects whether two or more pages have
been fed into the scanner at the same time. An error code is
displayed when a double feed occurs. Two detection methods are
provided: detection by page length and ultrasonic detection. They
can be used separately or together.
▲
STAPLE
DETECTION
Sensors are used to detect feed errors
caused by stapled documents. This
function works with documents that are
larger than A5 (148 x 210 mm) and
stapled in only one corner.
▲
2
U S E F U L F E AT U R E S
Count Only key
