4-7
Chapter 4 Other Functions
• Seam artifacts may appear in the reconstructed image
because of the crease line or differences in the loading
position of each side.
• Load the document with the crease line on the right side.
• The scan image of the front side becomes the left half of the
reconstructed image.
• The maximum document size for Folio Scan is 22" × 34"/A1.
• 22" × 34"/A1 document pages should be folded lengthwise
and scanned with the following settings:
Scanner: Long Document Mode [ON1]
Page Size: Auto-Detection
• If scanning is performed when Long Document Mode is
enabled, the image may be lost. Set Long Document Mode to
[OFF] except when scanning 22" × 34"/A1 document pages.
• If scanning is performed with the scanning mode set to color,
image quality set to [Image quality priority], and scanning side
set to [Duplex], the image may be lost. If this occurs, scan by
using black and white, reducing the image quality, or setting
the scanning side to [Simplex].
Hint
Folio Scan is performed by setting the scanning side to [Folio]
in the ISIS/TWAIN driver.
■
Imprinter (Optional)
An imprinter that prints on scanned documents is available
as an option. For details, contact your dealer or service
representative.
Hint
• The text to print and the printing position can be specified in
the ISIS/TWAIN driver.
• Even if the imprinter is not installed, you can add a specified
text string onto scanned images.
