Indoor Dome Housing
DR41-C-VB / DR41-S-VB Installation Guide
BIE-7205-000
Be sure to read the “Safety Precautions” section for correct use. After reading this “Installation
Guide”, keep it in a readily accessible location for future reference. In addition to this
“Installation Guide”, also read the “Installation Guide” included with the camera.
Caution
Request a professional installer for all installation work. Never try
to install the camera yourself. Doing so may result in unforeseen
accidents such as dropping the camera or electric shock.
Check Included Items
This product comes with the following items. If any item is missing, contact the dealer where
you purchased the product.
1. Ceiling bracket
2. Backside ceiling bracket
3. Dome
4. Dust cover
5. Safety wire
6. Template
7. Fixing screws (M3) x7
8. Ceiling bracket screws (M4) x3
9. Dome fixing screw (M2) x1
10. Installation Guide (this document)
Safety Precautions
This section explains precautions that must be observed when using the camera. If
they are not observed, injury, death and/or property damage may occur. Read the
following information carefully and be sure to observe the precautions.
Installation Precautions
Warning
Do not install in the following places:
• Places in direct sunlight, near heat-generating objects, or locations subject to high
temperatures
• Places near fire sources or flammable solvents (alcohol, thinner, fuel, etc.)
• Humid or dusty places
• Places subject to oily smoke or steam
• Places subject to sea air
• Confined or enclosed places
Failure to do so may result in fire or electric shock.
Caution
For installation or inspection of this camera, consult the dealer where you purchased
the product.
• This installation should be made by a qualified service person and should conform to
all local codes.
• When installing, make sure the surface is capable of withstanding the total weight of the
camera and accessories, and sufficiently reinforce if necessary.
• Be sure to use installation screws designed for the type of surface the camera is to
be installed.
• Periodically check the parts and screws for rust and loosening, in order to prevent
injuries and equipment damage due to falling items.
• Do not install in unstable places, places subject to significant vibration or impact, or
places subject to salt damage or corrosive gas.
• The camera cannot be installed on vertical surfaces such as walls.
• Be sure to attach the safety wire when installing the camera.
• Use only with compatible cameras.
Failure to do so may result in the camera falling or other accidents.
• Do not touch the edge of the metal parts with bare hands.
• Be careful not to get your fingers caught when installing.
Failure to do so may result in injuries.
Caution
• Do not hold the device by the camera head.
• Do not turn the camera rotator by hand.
• Do not install the camera on an unstable or inclined surface.
• If there is condensation, please wait to power on, until the condensation dissipates.
Failure to do so may result in malfunctions.
• Take care not to damage wiring or piping.
Failure to do so may result in damage to peripheral items.
Precautions for Use
Warning
• If you discover defective conditions such as smoke, strange sounds, heat or strange
odors, immediately stop using the camera and contact your nearest dealer.
Fire or electric shock may result from continued use of the product.
• If thunder starts, stop installation or inspection etc. and do not touch the camera or
continue connecting the cable.
• Do not disassemble or modify the camera.
• Do not damage the connecting cable.
• Do not spray the camera with water, or otherwise make it wet.
• Do not insert foreign objects such as water or metal into the camera.
• Do not use flammable sprays near the camera.
• Do not leave LAN cables, external power supply, or the power connector for the AC
adapter (sold separately) connected when the camera is not in use for long periods.
• Do not use flammable solvents such as alcohol, paint thinner or benzine when
cleaning the camera.
Failure to do so may result in fire or electric shock.
Notes on Power Supply
Warning
• Only use the dedicated AC adapter (sold separately) , when using AC adapter.
• Do not set any heavy objects on the power cable (or the LAN cable for a PoE power
supply).
• Do not pull, forcibly bend, scratch, or modify the power cable (or the LAN cable for a
PoE power supply).
• Do not cover or wrap the AC adapter (sold separately) with cloth or blankets.
Failure to do so may result in fire or electric shock.
Be sure to read the user manual for the dedicated AC adapter (sold separately)
before use.
Caution
• Never touch the camera head during initialization. Initialization failure or malfunction
may result.
• After turning off the power, wait for at least five seconds before turning the power on
again. If the power is turned on again too quickly, the camera may not operate well.
ENGLISH
© CANON INC. 2017
Printed in Taiwan
Symbols Indicating Safety Precautions
This Installation Guide uses the following marks to indicate the important information
the user should know in order to use the product safely. Be sure to observe these
items.
Warning
Inappropriate handling against the instruction accompanied
by this sign may result in death or serious injury. Be sure to
observe these warnings to ensure safety.
Caution
Inappropriate handling against the instruction accompanied
by this sign may result in injury. Be sure to observe these
precautions to ensure safety.
Caution
Inappropriate handling against the instruction accompanied
by this sign may result in property damage. Be sure to observe
these precautions.
Important
This symbol indicates important or restricted items. Be sure to
read this section.
Note
Contains reference information for operation or additional
explanations.
Using the Indoor Dome Housing
When using the indoor dome housing, it is recommended you use it with the black model camera
to reduce the camera's visibility and reflection.
Important
• If using the dome housing, care must be taken when installing the camera since the dome may blur
the video, or the body of the dome may be visible, when the camera lens approaches the horizontal
(less than 15°).
• The angle of view is slightly wider when using the dome housing.
• Grime on the dome may reduce image quality. Periodic cleaning is recommended. Use a soft cloth
moistened with water or diluted neutral detergent to wipe away grime, then wipe dry.
The contents of this guide are subject to change without any prior notice.
