180
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.
Under the [
z
1
] tab, select [
Beep
], then
press <
0
>. Select [
Disable
], then press
<
0
>.
This setting prevents shooting if there is no card in the camera.
Under the [
z
1
] tab, select [
Release
shutter without card
], then press <
0
>.
Select [
Disable
], then press <
0
>.
If there is no card inserted in the camera
and you press the shutter button, “
Card
”
will be displayed in the viewfinder, and
you cannot release the shutter.
You can set how long the image is displayed on the LCD monitor
immediately after capture. If [
Off
] is set, the image will not be displayed
immediately after image capture. If [
Hold
] is set, the image review will
be displayed up until the [
5
1: Auto power off
] time has elapsed.
During image review, if you operate any camera controls such as
pressing the shutter button halfway, the image review will end.
Under the [
z
1
] tab, select [
Image
review
], then press <
0
>. Select the
desired setting, then press <
0
>.
Handy Features
3
Disabling the Beeper
3
Card Reminder
3
Setting the Image Review Time
COP
Y
Summary of Contents for EOS 1200D
