304
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
that may be visible on captured images. However, for the case where
visible dust still remains, you can append the Dust Delete Data to the
image for erasing the dust spots later. The Dust Delete Data is used by
Digital Photo Professional (EOS software, p.444) to erase the dust
spots automatically.
Prepare a solid white object such as a sheet of paper.
Set the lens focal length to 50 mm or longer.
Set the lens’s focus mode switch to <
MF
> and set the focus to
infinity (
u
). If the lens has no distance scale, rotate the camera to
face toward you and turn the focusing ring clockwise all the way.
1
Select [Dust Delete Data].
Under the [
z
4
] tab, select [
Dust
Delete Data
], then press <
0
>.
2
Select [OK].
When you select [
OK
] and press
<
0
>, the automatic sensor
cleaning will be performed, then a
message will appear. Although there
will be a mechanical sound of the
shutter during the cleaning, no picture
is taken.
3
Appending Dust Delete Data
N
Preparation
Obtaining the Dust Delete Data
