Canon EOS 5D Mark III Instruction Manual Download

Page: 307 / 404

307

Digital Print Order Format (DPOF)

Sel.Image

Select and order images one by one.
If you press the <

> button and turn the

> dial counterclockwise, you can

select an image from a three-image
display. To return to the single-image
display, turn the <

> dial clockwise.

Press the <

> button to save the

print order to the card.

[Standard] [Both]

Press <

> and a print order for one

copy of the displayed image will be
placed. By turning the <

> dial, you

can set the quantity up to 99.

[Index]

Press <

> to include images with a

checkmark <

> in the index print.

Select [

Mark all in folder

] and select the folder. A print order for one

copy of all the images in the folder will be placed. If you select [

Clear

all in folder

] and select the folder, the print order for that folder will

all be canceled.

All image

If you select [

Mark all on card

], one copy of all the images on the

card will be set for printing. If you select [

Clear all on card

], the print

order will be cleared for all the images on the card.

Print Ordering

Quantity

Total images selected

Index icon

Checkmark

Note that RAW images and movies will not be included in the print order
even if you set “By

” or “All image.”

When using a PictBridge printer, print no more than 400 images for one print
order. If you specify more than this, all the images may not be printed.

COP

Summary of Contents for EOS 5D Mark III





















































































































































































































































































































































































































Search results

Summary of Contents for EOS 5D Mark III

Reviews:

Related manuals for EOS 5D Mark III

Brands by name

Popular brands

Canon EOS 5D Mark III, Instruction Manual

Search results

Summary of Contents for EOS 5D Mark III

Reviews:

Related manuals for EOS 5D Mark III

Brands by name

Popular brands