manualshive.com logo in svg

Canon EOS C500, Instruction Manual

The Canon EOS C500 is a professional-grade digital cinema camera that provides exceptional image quality and versatility. With its advanced features and capabilities, it is essential to familiarize yourself with its functionalities. Access the free Instruction Manual for the Canon EOS C500, available for download at 88.208.23.73:8080.

Share
Download
background image

Troubleshooting

188

Cannot record on the SD card.

- Initialize the SD card (

A

45) when you use it with the camera for the first time.

- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
- The SD card is full. Delete some photos (

A

162) to free some space or replace the SD card.

- The folder and file numbers have reached their maximum value. Set the [Other Functions] 

>

 [Photo Numbering] 

setting to [Reset] and insert a new SD card.

Recording to and playing back from a CF card is slow.

- This may occur as video is recorded/deleted over time. Save your clips (

A

155) and initialize the CF card (

A

45).

The optional RC-V100 Remote Controller or commercially available remote control does not work.

- Make sure that the [Other Settings] 

>

 [REMOTE Term.] setting is set to [RC-V100] when using the optional RC-V100 

Remote Controller or [Standard] when using a commercially available remote control. 

- When [Camera Setup] 

>

 [CINEMA Locked] is set to [On] or a custom picture file is not selected, custom picture 

settings cannot be adjusted using the RC-V100. Set [CINEMA Locked] to [Off] or select a custom picture file ([C1] to 
[C9]) (

A

114).

- Turn off the camera, reconnect the remote controller and then turn the camera back on again.

Connections with External Devices

Video is not recorded on an external recorder.

- Make sure the camera is connected to the external recorder correctly (

A

41).

- Check the external recorder’s instruction manual to make sure that the external recorder is set to receive the signal 

being output by the camera. 

Video noise appears on a nearby TV screen.

- When using the camera in a room where a TV is located, keep a distance between the compact power adapter and the 

power or antenna cables of the TV.

Playback looks fine on the camera but there is no image on the external monitor.

- The camera is not connected correctly to the external monitor. Make sure you are using the correct connection 

(

A

146).

- The video input on the external monitor is not set to the video terminal to which you connected the camera. Select the 

correct video input.

The camera is connected using a commercially available HDMI cable, but there is no picture or sound from the 
external monitor.

- Disconnect the HDMI cable and then restore the connection or turn the camera off and then on again.

List of Messages

Refer to this section if a message appears on the screen. The messages in this section appear in alphabetical 
order. For error messages related to the optional WFT-E6 Wireless File Transmitter refer to the 

Troubleshooting

 

section of the ‘WFT-E6 Wireless File Transmitter - Guide for Canon Camcorders’ (

A

34).

Accessing CF A/CF B   Do not remove

- You opened the CF card slot cover while the camera was accessing the CF card. Close the CF card slot cover.

Camera 

Q

 Lens communication error. Clean the lens’s contacts and reattach the lens.

- The camera cannot communicate with the lens. Remove the lens while making sure that dust does not accumulate on 

the lens or enter the camera. Then, wipe the lens mount and lens contacts with a soft cloth.

Cannot acquire battery information

- Battery information can be displayed only for batteries bearing the Intelligent System mark.

Cannot communicate with the battery pack.   Continue using this battery pack?

- You attached a battery pack that does not bear the Intelligent System mark.
- If you are using a battery pack that bears the Intelligent System mark, there may be a problem with the camera or 

battery pack. Consult a Canon Service Center.

Cannot play back

- The file control information is corrupted or there was a decoder error. Turn off the camera and back on again. If this 

does not solve the problem, consult a Canon Service Center.
• Corrupted file control information cannot be recovered. CF cards or clips with corrupt file control information cannot 

be read by the Canon XF Utility software or associated plugins.

COP

Y

Summary of Contents for EOS C500





















































































































































































































Reviews:

No comments

Related manuals for EOS C500

Panasonic AG-HPX500 Menu Information preview
AG-HPX500
Brand: Panasonic Pages: 15
Panasonic AG-HPX300P Replacement Parts List Manual preview
AG-HPX300P
Brand: Panasonic Pages: 40
Panasonic AG-HMC40 User Manual preview
AG-HMC40
Brand: Panasonic Pages: 7
Panasonic AG-HMC150 Basic Instructions preview
AG-HMC150
Brand: Panasonic Pages: 20
Panasonic AG-HMC150 Menu Information preview
AG-HMC150
Brand: Panasonic Pages: 19
Panasonic AGEZ50UP - DIGITAL CAMERA REC Operating Instructions Manual preview
AGEZ50UP - DIGITAL CAMERA REC
Brand: Panasonic Pages: 58
Panasonic AG-DVC7P Brochure & Specs preview
AG-DVC7P
Brand: Panasonic Pages: 4
Panasonic AGDVC30 - 3 CCD DV CAMCORDER Operating Instructions Manual preview
AGDVC30 - 3 CCD DV CAMCORDER
Brand: Panasonic Pages: 88
Panasonic AG-AC130A Series Manual preview
AG-AC130A Series
Brand: Panasonic Pages: 17
Panasonic AVCCAM AG-HMR10 Brochure & Specs preview
AVCCAM AG-HMR10
Brand: Panasonic Pages: 6
E-Vision BUMDV01FAHD Quick Manual preview
BUMDV01FAHD
Brand: E-Vision Pages: 24
Vivitar DVR 558HD-V1 User Manual preview
DVR 558HD-V1
Brand: Vivitar Pages: 69
Swann DIY Security Cam Installation Manual preview
DIY Security Cam
Brand: Swann Pages: 24
Panasonic NV-MX300EG Service Manual preview
NV-MX300EG
Brand: Panasonic Pages: 134
Panasonic NV-GX7G Service Manual preview
NV-GX7G
Brand: Panasonic Pages: 135
Panasonic NV-RZ10EN/A Operating Instructions Manual preview
NV-RZ10EN/A
Brand: Panasonic Pages: 74
Canon Canovision8 E50E Service Manual preview
Canovision8 E50E
Brand: Canon Pages: 179
Samsung VP-M2100S Owner'S Instruction Book preview
VP-M2100S
Brand: Samsung Pages: 137

Brands by name

Popular brands

Load more brands