119
Changing the Focusing Method
If the focus is far off, face detection will not be possible. If you set
[
Continuous AF
] to [
Enable
], you can prevent the image from becoming
greatly out of focus.
An object other than a human face may be detected as a face.
Face detection will not work if the face is very small or large in the
picture, too bright or too dark, or partially hidden.
The <
p
> may cover only part of the face.
When you press the <
X
L
> button, the <
> AF point will appear at the
center of the screen. Drag it to move the AF point. Press the <
X
L
>
button again, and the AF point will move to the detected subject.
Since AF is not possible with a face detected near the edge of the
picture, the <
p
> will be grayed out. If you press the shutter button
halfway, the subject will be focused in FlexiZone - Multi method with
automatic selection.
www.devicemanuals.eu
www.devicemanuals.eu
button again, and the AF point will move to the detected subject.
Since AF is not possible with a face detected near the edge of the
> will be grayed out. If you press the shutter button
in FlexiZone - Multi method with