3
Movie Menu Function Settings
198
[
Manual
]
: For advanced users. You can adjust the recording
level manually.
Select [
Rec. level
] and while looking at the level
meter, press the <
Y
A
>/<
Z
O
> button to adjust.
The loudest sound will be displayed for approx. 3 sec.
Adjust so that the level meter on the right of “12” lights
up occasionally. If the level meter lights up near “0”,
the sound may be distorted.
[
Disable
] : Sound is not recorded.
[
Wind filter
]
When set to [
Enable
], it reduces wind noise when there is wind
outdoors. This feature takes effect only with the built-in
microphone.
Note that [
Enable
] will also reduce low bass sounds, so set this
function to [
Disable
] when there is no wind. It will record a more
natural sound than with [
Enable
].
[
Attenuator
]
Even if you set [
Sound recording
] to [
Auto
] or [
Manual
] and
shoot, sound distortion may still result if there is a very loud sound.
In such a case, setting it to [
Enable
] is recommended.
Video snapshot
You can shoot video snapshots. For details, see page 189.
The sound volume balance between L (left) and R (right) cannot be
adjusted.
Both L and R record audio at a 48 kHz/16-bit sampling rate.
www.devicemanuals.eu
], it reduces wind noise when there is wind
], it reduces wind noise when there is wind
outdoors. This feature takes effect only with the built-in
outdoors. This feature takes effect only with the built-in
] will also reduce low bass sounds, so set this
] will also reduce low bass sounds, so set this
] when there is no wind. It will record a more
] when there is no wind. It will record a more
].
].
Sound recording
Sound recording
shoot, sound distortion may still result if there is a very loud sound.
shoot, sound distortion may still result if there is a very loud sound.
In such a case, setting it to [
In such a case, setting it to [
www.devicemanuals.eu
The sound volume balance between L (left) and R (right) cannot be
Both L and R record audio at a 48 kHz/16-bit sampling rate.
