278
With a PictBridge printer, you can easily
print images with DPOF.
1
Prepare to print.
See page 266. Follow the “Connecting the Camera to a Printer”
procedure up to step 5.
2
Under the [
x
1] tab, select [Print order].
3
Select [Print].
[
] will be displayed only if the camera is connected to a
printer and printing is possible.
4
Set the [Paper settings]
(p.268)
.
Set the printing effects (p.270) if necessary.
5
Select [OK].
W
Direct Printing with DPOF
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file number.
If [
Bordered
] is set, certain printers may imprint the date on the border.
Depending on the printer, the date may appear faint if it is imprinted on a
bright background or on the border.
Under [
Adjust levels
], [
Manual
] cannot be selected.
If you stopped the printing and want to resume printing the remaining
images, select [
Resume
]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• Before resuming the printing, you changed the print order or deleted
print-ordered images.
• When you set the index, you changed the paper settings before
resuming the printing.
• When you paused the printing, the card’s remaining capacity was low.
If a problem occurs during printing, see page 274.
www.devicemanuals.eu
1] tab, select [Print order].
1] tab, select [Print order].
] will be displayed only if the camera is connected to a
] will be displayed only if the camera is connected to a
(p.268)
(p.268)
.
.
Set the printing effects (p.270) if necessary.
Set the printing effects (p.270) if necessary.
www.devicemanuals.eu
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file number.
Bordered
] is set, certain printers may imprint the date on the border.
Depending on the printer, the date may appear faint if it is imprinted on a
