284
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus, C.Fn IV:
Operation/Others.
3
Custom Function Settings
N
C.Fn I: Exposure
C.Fn-1
Exposure level increments
0:
1/3-stop
1:
1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is
effective when you prefer to control the exposure in less fine
increments than 1/3-stop increments.
C.Fn-2
ISO expansion
0:
Off
1:
On
When you set the ISO speed, you will be able to set “
H
” (equivalent to
ISO 25600) for still photos and “
H
” (equivalent to ISO 12800) for
movies. Note that if [
C.Fn-3: Highlight tone priority
] is set to [
1:
Enable
], “
H
” cannot be set.
With setting 1, the exposure level will be displayed on the LCD monitor as
shown below.
www.devicemanuals.eu
www.devicemanuals.eu
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is
effective when you prefer to control the exposure in less fine
www.devicemanuals.eu
C.Fn-2
ISO expansion
www.devicemanuals.eu
When you set the ISO speed, you will be able to set “
ISO 25600) for still photos and “
movies. Note that if [
” cannot be set.
www.devicemanuals.eu
With setting 1, the exposure level will be displayed on the LCD monitor as
