35
Installing and Removing the Battery and Card
4
Close the cover.
Press the cover until it snaps shut.
When you set the power to <
1
>,
the number of possible shots (p.39)
will be displayed on the LCD monitor.
1
Set the power to <
2
>.
2
Open the cover.
Make sure the LCD monitor and
Power/access lamp are off, then
open the cover.
If [
Recording...
] is displayed, close
the cover.
3
Remove the battery.
1. Press the battery release lever as
shown by the arrow. 2. Remove the
battery.
To prevent short circuiting of the
battery contacts, be sure to attach the
protective cover (provided, p.32) to
the battery.
4
Remove the card.
Gently push in the card, then let go to
eject it.
Pull the card straight out.
Possible shots
Removing the Battery and Card
www.devicemanuals.eu
Set the power to <
Set the power to <
Open the cover.
Open the cover.
Make sure the LCD monitor and
Make sure the LCD monitor and
Power/access lamp are off, then
Power/access lamp are off, then
open the cover.
open the cover.
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu