50
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Detaching a Lens
●
Minimizing Dust
-
When changing lenses, do it quickly in a place with minimal dust.
-
When storing the camera with the lens removed, always attach the
camera cap.
-
Wipe off any dust or dirt on the camera cap before you attach it.
●
Since the image sensor size is smaller than the 35mm film format, it will
look like the lens focal length is increased by approx. 1.6x. For example,
the focal length of a 15-45mm lens is approximately equivalent to a focal
length of 24-72mm on a 35mm camera.
Attaching EF and EF-S Lenses
●
To use EF and EF-S lenses, attach the optional Mount Adapter
EF-EOS M.
●
When carrying or using a camera with a lens that is heavier than the
camera, support the lens.
●
Adapters may extend the minimum focusing distance or affect the
maximum magnification or shooting range of the lens.
●
If the front part (focusing ring) of the lens rotates during autofocusing,
do not touch the rotating part.
●
The focus preset and power zoom features of some super telephoto
lenses are not supported.
Using a Tripod
●
When using a tripod while the adapter is attached to the camera, use
the tripod mount included with the adapter. Do not use the camera’s
tripod socket.
●
With EF lenses that incorporate a tripod mount (such as super
telephoto lenses), attach the tripod to the tripod mount on the lens.
●
The date/time battery will be charged in about 4 hours, even if the
camera is off, once you insert a charged battery pack, or when you
insert a DC coupler and connect a compact power adapter (both sold
separately).
●
Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on. Specify the correct
information.
Display Language
●
You can also change the display language by pressing the
button and choosing [Language ] on the [ 2] tab.
●
You can also set the display language on the [Language] screen by
touching a language and then touching it again.
Using a Lens
Attaching a Lens
●
The camera is compatible with EF-M lenses. To use EF and EF-S
lenses, attach the optional Mount Adapter EF-EOS M.
●
Align the mount indexes (the white dots) on the lens and camera, and
then turn the lens until it clicks into place.
●
To retract a lens with a lens retraction switch, hold the switch toward
as you turn the zoom ring to align the lens retraction index with the
zoom position index, and then release the switch.
●
Zooming should be done before focusing. The focus may change slightly
if you turn the zoom ring after a subject is in focus.
●
To protect the lens, keep the lens cap on when the camera is not in use.
●
Some lenses may cause vignetting if the built-in flash is used.
