87
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Power-Saving Adjustment
●
To conserve battery power, you should normally choose MENU > [ 2]
tab > [Power Saving] > [Auto Power Down] > [1 min.], and set [Display
Off] to [1 min.] or less.
●
The [Display Off] setting is applied even if you set [Auto Power Down]
to [Disable].
●
Power-saving functions are not available when you have set Eco Mode
to [On].
Screen Brightness
●
For maximum brightness, press and hold the button for at least one
second when the shooting screen is displayed or when in single-image
display. (This will override the [Disp. Brightness] setting on the [ 2]
tab.) To restore the original brightness, press and hold the button
again for at least one second or restart the camera.
Customizing Shooting Information Display
●
For a smaller grid pattern, access MENU > [ 1] tab > [Shooting
information display] > [Grid display].
●
To switch from a brightness histogram to an RGB histogram, choose
MENU > [ 1] tab > [Shooting information display] > [Histogram].
Customizing Playback Information Display
●
An example of customized display is shown at left on the display
customization screen.
●
To display [ ] mode setting details, add a [ ] mark to [Info display 2]
in MENU > [ 5] tab > [Playback information display]. This setting
information, followed by [Info display 2], will be displayed when you
press the button.
Formatting Memory Cards
●
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back
them up.
●
Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
●
The total card capacity indicated on the formatting screen may be less
than the advertised capacity.
Low-Level Formatting
●
Low-level formatting erases all data on a memory card. Before low-
level formatting, copy images on the memory card to a computer, or
take other steps to back them up.
●
Low-level formatting takes longer than initial formatting, because data
is erased from all storage regions of the memory card.
●
You can cancel low-level formatting in progress by choosing [Cancel].
In this case, all data will be erased, but the memory card can be used
normally.
Using Eco Mode
●
[
] is displayed on the shooting screen when Eco Mode is set to
[On].
●
The screen darkens about two seconds after you stop using the
camera. About ten seconds later, the screen turns off. The camera
turns off after approximately three minutes of inactivity.
●
To activate the screen and prepare for shooting when the screen is off
and the indicator is blinking, press the shutter button halfway.
