Canon EOS M200 Advanced User'S Manual Download

Page: 30 / 522

Safety Instructions

Be sure to read these instructions in order to operate the product safely.

Follow these instructions to prevent injury or harm to the operator of the

product or others.

WARNING:

Denotes the risk of serious injury or death.

Keep the product out of the reach of young children.

A strap wrapped around a person’s neck may result in strangulation.

The parts or provided items of cameras or accessories are dangerous if

swallowed. If swallowed, seek immediate medical assistance.

The battery is dangerous if swallowed. If swallowed, seek immediate medical

assistance.

Use only power sources specified in this instruction manual for use with the product.

Do not disassemble or modify the product.

Do not expose the product to strong shocks or vibration.

Do not touch any exposed internal parts.

Stop using the product in any case of unusual circumstances such as the presence

of smoke or a strange smell.

Do not use organic solvents such as alcohol, benzine or paint thinner to clean the

product.

Do not get the product wet. Do not insert foreign objects or liquids into the product.

Do not use the product where flammable gases may be present.

This may cause electric shock, explosion or fire.

Do not leave a lens or a camera/camcorder with a lens attached, exposed without the

lens cap attached.

The lens may concentrate the light and cause fire.

Do not touch the product connected to a power outlet during lightning storms.

This may cause electric shock.

Observe the following instructions when using commercially available batteries or

provided battery packs.

Use batteries/battery packs only with their specified product.

Do not heat batteries/battery packs or expose them to fire.

Do not charge batteries/battery packs using non-authorized battery chargers.

Do not expose the terminals to dirt or let them come into contact with metallic pins

or other metal objects.

Do not use leaking batteries/battery packs.

When disposing of batteries/battery packs, insulate the terminals with tape or other

means.

This may cause electric shock, explosion or fire.

If a battery/battery pack leaks and the material contacts your skin or clothing,

flush the exposed area thoroughly with running water. In case of eye contact,

flush thoroughly with copious amounts of clean running water and seek

immediate medical assistance.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands