Canon EOS M200 Advanced User'S Manual Download

Page: 95 / 522

Special Scene Mode Precautions

: Self Portrait

Areas other than people’s skin may be modified, depending on the shooting

conditions.

[Smooth skin effect]

settings specified in

[

]

mode are not applied in

[

]

mode.

[Background]

is set to

[Auto]

and cannot be changed in

[

]

flash mode when

you have raised the flash.

: Smooth skin

Areas other than people’s skin may be modified, depending on the shooting

conditions.

Setting details in

[

]

mode are not applied in

[

]

mode.

: Landscape

Flash photography is not possible.

: Sports

Under low light where camera shake tends to occur, the shutter speed value in
the lower left will blink. Hold the camera steady and shoot.

Flash photography is not possible.

: Food

The warm color cast of subjects may fade.

When multiple light sources are included in the scene, the warm color cast of
the picture may not be reduced.

If you use a flash,

[Color tone]

will be set to Standard.

If there are people in the picture, the skin tone may not be reproduced properly.

: Night Portrait

Tell subjects to remain still for a moment after the flash fires.

Focusing may be difficult when subject faces look dark. In this case, focus
manually by setting

[

: Focus mode]

[MF]

or setting the lens’s focus mode

switch to <

> (

57,

184).

Autofocusing at night or in dark scenes may be difficult when points of light lie
within the AF point. In this case, focus manually by setting

[

: Focus mode]

[MF]

or setting the lens’s focus mode switch to <

> (

57,

184).

Shots will look slightly different from the image as displayed on the screen.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands