3
Instructions
1. Turning on the camera
1. Use the On/Off lever (on top) to turn on the
camera:
1.1. Locate the On/Off lever on the right side of the
camera as you face its back (Fig. 1a).
1.2. Slide the lever to the On position.
2. Extending the lens
1. Locate the black, arrow-shaped slide lock on the
lens body (Fig. 2a). The lock is on the left side of
the lens as you face the back of the camera. This
toggle prevents the lens from unexpectedly moving.
2. Slide and hold the lock toward its arrow marking.
3. While holding the lock, turn the lens counter-
clockwise (as you face the camera’s back). You
can release the lock once the lens starts turning.
Note: The camera starts to show an image when the
lens body is at the 15 mm marking.
3. Selecting a recording mode
1. Locate the mode-selection dial on top of the
camera.
2. Turn the dial, clockwise or counter-clockwise, to
select a recording mode (Fig. 3a). The selected
mode is the dial’s glyph that aligns with the
camera’s white notch. Note: If you have the
touchscreen open, there’s a short description of
each mode that appears onscreen.
3. Turn the dial until its P glyph aligns with the
notch to open the Program AE mode.
4. Press the Menu button on the back of the camera
to navigate through the camera settings (Fig. 3b).
Fig. 1a. Power button
Fig. 2a. Slide lock at
the 15 mm marking
Fig. 3a. Mode-selection
dial set to Scn (Special
Scene) mode
Fig. 3b. Menu button
