Canon EOS REBEL T6i Instruction Manual Download

Page: 284 / 414

284

You can rate images (still photos and movies) with one of five rating
marks:

. This function is called rating.

Select [Rating].



Under the [

] tab, select [

Rating

then press <

Select an image.



Press the <

> <

> keys to select

an image or movie to be rated, then
press <



By pressing the <

> button, you

can select images from a three-image
display. To return to the single-image
display, press the <

> button.

Rate the image.



Press the <

> <

> keys to select a

rating.



When you select a rating for the
image, the number beside the set
rating will increase by one.



To rate another image, repeat steps 2
and 3.



To return to the menu, press the
<

> button.

Setting Ratings

Summary of Contents for EOS REBEL T6i































































































































































































































































































































































































































Search results

Summary of Contents for EOS REBEL T6i

Reviews:

Related manuals for EOS REBEL T6i

Brands by name

Popular brands

Canon EOS REBEL T6i, Instruction Manual

Search results

Summary of Contents for EOS REBEL T6i

Reviews:

Related manuals for EOS REBEL T6i

Brands by name

Popular brands