37
The card (sold separately) can be an SD, SDHC, or SDXC memory
card. SDHC and SDXC memory cards with UHS-I can also be used.
The captured images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to
enable writing and erasing.
1
Open the cover.
Slide the cover as shown by the
arrows to open it.
2
Insert the card.
As shown by the illustration, face
the card’s label side toward you
and insert it until it clicks in place.
3
Close the cover.
Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
When you set the power switch to
<
1
>, the number of possible shots
will be displayed on the LCD monitor.
Installing and Removing the Card
Installing the Card
Write-protect switch
Possible shots
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Setting [
z
1: Release shutter without card
] to [
Disable
] will prevent
you from shooting without a card inserted (p.256).
Summary of Contents for EOS REBEL T6i
Page 1: ...E INSTRUCTION MANUAL EOS REBEL T6i W EOS 750D W...
Page 220: ......
Page 276: ......
Page 398: ...398 MEMO...
