Canon EOS RP Advanced User'S Manual Download

Page: 567 / 612

567

Troubleshooting

The maximum burst during continuous shooting is lower.

If you shoot a subject that has fine detail such as a field of grass, the file

size will be larger, and the actual maximum burst may be lower than the

number listed on

583.

Even after I change the card, the maximum burst displayed for

continuous shooting does not change.

The maximum burst displayed does not change when you switch cards,

even if you switch to a high-speed card. The maximum burst shown in

the table on

583 is based on Canon’s testing card. (The faster the

card’s writing speed, the higher the actual maximum burst will be.) For

this reason, the maximum burst displayed may differ from the actual

maximum burst.

High-speed display is not available during high-speed

continuous shooting.

Refer to the high-speed display requirements on

181.

Some image quality options are not available with cropped

shooting.

image quality options are not available when

[1.6x

(crop)]

is set, or with EF-S lenses.

The aspect ratio cannot be set.

With EF-S lenses,

[1.6x (crop)]

is set automatically, and no other aspect

ratios are available.

Summary of Contents for EOS RP





































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS RP

Reviews:

Related manuals for EOS RP

Brands by name

Popular brands

Canon EOS RP, Advanced User'S Manual

Search results

Summary of Contents for EOS RP

Reviews:

Related manuals for EOS RP

Brands by name

Popular brands