background image

13-4

Troubleshooting

Chapter 13

Jams in the Multi-Purpose Tray

If print media jams in the multi-purpose tray, the LCD displays 

CLEAR PAPER JAM

.

Follow this procedure to clear the jam:

n

You do not need to unplug the unit when clearing paper jams.

1

Close the document tray if necessary
(MultiPASS models only).

2

Gently pull any jammed paper out of the unit
as shown.

• You can hold the document tray up for easy

access to the jammed paper (FAX models only).

3

Remove the paper stack from the multi-
purpose tray and reload it. (

 p. 2-17)

• Make sure the stack does not exceed the paper

limit mark (

P

).

4

Press Resume to start the operation again.

• If you are printing from a Windows

®

 application,

follow the instructions displayed by the software on
your PC.

n

If the paper jam occurred while a fax was being received into the unit’s memory, that fax will print
automatically when the jam is cleared and you press Resume.

Summary of Contents for FAX B210c























































































































































































































Reviews: