Canon FAX B210c User Manual Download

Page: 204 / 214

B-4

Options

Appendix B

Return the unit to its upright position and
place the handset in its cradle.

• Make sure the cradle support rests on the table

top along with the unit.

Connect the line from the handset to the

jack.

Reconnect the power cord.

Reinstall the BJ cartridge in the unit.
(

→

p. 2-14)

Maintaining Your Handset

To maintain your handset in top working condition, be sure to follow these guidelines:

• Do not leave your handset exposed to direct sunlight.

• Do not install your handset in hot or humid conditions.

• Do not spray aerosol polishes on your handset since they may enter the holes on your

handset and cause damage.

• Use a damp cloth to clean your handset.

Summary of Contents for FAX B210c























































































































































































































Search results

Summary of Contents for FAX B210c

Reviews:

Related manuals for FAX B210c

Brands by name

Popular brands

Canon FAX B210c, User Manual

Search results

Summary of Contents for FAX B210c

Reviews:

Related manuals for FAX B210c

Brands by name

Popular brands