1
2
3
4
5
1-4
4.
Use [Up/Down] to find the required recipient.
5.
Press [Start] to start dialing the displayed
recipient.
Press [Stop/Reset], then [Set] to cancel sending the fax.
■
Redialing
Redialing can be done manually or automatically. For automatic
redialing, you can set how many times the machine redials and
the duration of interval between redials.
Redialing Manually
1.
Press [Redial] to dial the last number you
dialed using the numeric buttons.
To cancel manual redialing, press [Stop/Reset], then [Set].
Redialing Automatically
1.
Press [Menu].
2.
Use [Up/Down] to select <TX SETTING?>, then
press [Set].
3.
Use [Up/Down] to select <4 AUTO REDIAL?>,
then press [Set].
4.
Use [Left/Right] to select <ON>, then press
[Set].
5.
Use the numeric buttons to enter the number
of redials the machine will make, then press
[Set].
NOTE
Regardless of the number you entered, the machine makes only
one redialing attempt if it does not detect a busy signal.
6.
Use the numeric buttons to enter the duration
of interval (in minutes) between redials, then
press [Set].
7.
Press [Stop/Reset] to return to standby mode.
T I M E S = 2 ( 1 - 1 0 )
Y E S = S E T
Ex.
I N T E R V A L = 2 m i n ( 2 - 9 9 )
Y E S = S E T
Ex.
