1
2
3
4
5
1-12
4.
Use the numeric buttons to enter the time of
transmission (in 24-hour format), then press
[Set].
5.
Use the numeric buttons to enter a recipient,
or press [Add. Mode] to specify the fax feature
you want to start at the specified time.
<1 BROADCAST>: Broadcasting
<4 POLLING RX>: Polling receiving.
<5 RELAY INITIATE>: Relay initiation.
6.
If required, press [Down] and use the numeric
buttons to enter the subaddress (up to 20
digits).
If no subaddress is required, skip to step 8.
Subsequent screens displayed vary depending on the fax feature
selected.
7.
If required, press [Down] and use the numeric
buttons to enter the password (up to 20 digits).
If no password is required, skip to step 8.
8.
Press [Start] to scan the document for timer
sending.
■
Polling Sending
Polling sending allows you to send a document in response to
the recipient machine’s request.
1.
Load a document.
2.
Press [Add. Mode] twice.
3.
Use [Up/Down] to select <3 POLLING TX?>,
then press [Set].
T I M E R = 2 0 : 0 0
Y E S = S E T
Ex.
S U B = 1 2 3 4 _
P W D = ( T X = S T A R T )
Ex.
P W D = 5 6 7 8 _
( T X = S T A R T )
Ex.
