1
2
3
4
5
1-14
■
Relay Initiation
Relay initiation allows you to send a document to a remote
machine (relay station), which in turn sends the document to
other destinations. How the document is handled after it
reaches the relay station depends on what function is registered
in the station’s subaddress.
1.
Load a document.
2.
Press [Add. Mode] twice.
3.
Use [Up/Down] to select <5 RELAY INITIATE?>,
then press [Set].
4.
Use the numeric buttons, one-touch speed
dialing button, coded speed dialing code, or
directory dialing to specify the relay station,
then press [Set].
5.
Use the numeric buttons to change or enter
the relay station’s subaddress (up to 20
digits), then press [Set].
6.
Use the numeric buttons to change or enter
the password (up to 20 digits).
If no password is required, skip to step 7.
7.
Press [Start].
S U B A D D R E S S = 1 2 3 _
Y E S = S E T
Ex.
P W D = 5 6 7 8 _
( T X = S T A R T )
Ex.
