1
2
3
4
5
3-4
●
RESULT: Result of transaction
– OK: Transmission successful
– NG: Transmission failed
– STOP: Transmission manually canceled before completion
– MEM.FULL: Memory became full during transmission
– JAM: Document jam occurred
– NO ANSWER: Call not answered
●
Error code: For descriptions of error codes, see Chapter
9, “Troubleshooting,” in the Basic Guide.
■
RX RESULT REPORT
1.
Press [Menu].
2.
Use [Up/Down] to select <REPORTING
SETTING?>, then press [Set].
3.
Use [Up/Down] to select <3 RX RESULT
REPORT?>, then press [Set].
4.
Use [Left/Right] to select <ON>, <ON
(ERROR)>, or <OFF>, then press [Set].
<ON>: Printed out automatically after each reception.
<ON (ERROR)>: Printed out automatically only when an error
occurs.
<OFF>: Not printed out automatically.
5.
Press [Stop/Reset] to return to standby mode.
Report Items
The following items are displayed in a Reception Result Report:
●
SESSION: Session number
●
FUNCTION: Type of transmission
– RX: Memory or print reception
– POLLING RX: Polling receiving
●
NO.: Sequence number
●
DESTINATION STATION: Name and number of the
sending machine (displayed only if registered in their
machine)
●
DATE: Date of transaction
●
TIME: Time of transaction
●
PAGE: Number of pages received
●
DURATION: Amount of time taken for a transaction
●
MODE: Mode of transaction (G3 or ECM)
●
RESULT: Result of transaction
– OK: Reception successful
– NG: Reception failed
– STOP: Reception manually canceled before completion
– MEM.FULL: Memory became full during reception
●
Error code: For descriptions of error codes, see Chapter
9, “Troubleshooting,” in the Basic Guide.
