1
2
3
4
5
6
7
8
9
Back
Next
Previous
TOP
3-20
Before Using the
Machine
Document and Paper
Sending and
Receiving
Copying
Printing
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
7.
Press
[
] or [
] to select the time (in
minutes) between redials, then press [OK].
R E D I A L I N T E R V A L
2 M I N .
Ex.
You can also enter values with the numeric keys.
8.
Press [Stop/Reset] to return to the standby
mode.
Checking Dialing Line
Checking dialing line function enables you to configure the setting
on whether to check for a dial tone.
The default setting is <OFF>.
1.
Press
[Menu].
2.
Press
[
] or [
] to select <FAX SETTINGS>,
then press [OK].
3.
Press
[
] or [
] to select <TX SETTINGS>,
then press [OK].
4.
Press
[
] or [
] to select <DIALING LINE
CHCK>, then press [OK].
■
5.
Press
[
] or [
] to select <ON>, then press
[OK].
6.
Press [Stop/Reset] to return to the standby
mode.
Dialing an Overseas Number (With Pauses)
When you dial or register an overseas number, you may need to
insert a pause within the number.
Make sure the LCD shows the fax mode. If the LCD shows the copy mode,
press [Stop/Reset].
1.
Set
documents.
2.
Use the numeric keys to dial the international
access code.
For details on international access codes, contact your local
telephone company.
3.
If necessary, press [Pause] to insert a pause.
= 1 2 3 P
Ex.
The letter <P> is displayed between the numbers.
<P> in the fax/telephone number represents 2.5-second pause.
■
–
–
