55
appears.
In
mode, adjust the volume of the
headphones with the [PHONES VOL.]
setting (
90). In
mode, adjust
the headphone’s volume the same way
you adjust the speaker’s volume
(
38). During slideshow playback,
push the joystick (
) to adjust the
volume.
IMPORTANT
• When using headphones, make sure to
lower the volume to an appropriate
level.
• Do not connect the headphones to the
AV OUT/
H
terminal if the
icon does
not appear on the screen. Only noise
will be output in such case.
NOTES
• Use commercially available headphones
with a
∅
3.5 mm minijack.
• Even if the AV OUT/
H
terminal is set to
[
PHONES] during playback mode,
the setting will change to [
AV] when
the operating mode is changed to
or
mode.
Using an External Microphone
You can attach a commercially available
microphone for recording movies.
When recording in very quiet
surroundings, the built-in microphone
may pick up the sound of the
camcorder’s internal machinery. In such
case, we recommend using an external
microphone.
Connecting a Microphone
Connect the external microphone to the
MIC terminal. Use commercially
available condenser microphones with
their own power supply. You can
connect almost any stereo microphone
with a
∅
3.5 mm plug but audio
recording levels may vary.
IMPORTANT
Make sure to check the audio recording
level before recording with the external
microphone (
88).
NOTES
When an external microphone is
connected to the camcorder,
[WIND SCREEN] will automatically be set
to [
OFF
].
T
O
ADJUST
THE
VOLUME
OF
THE
HEADPHONES
(
COP
Y
