Preparations
20
7
Charging will start when the
camcorder is turned off.
• The ON/OFF(CHG) indicator starts
flashing in red. The indicator will go
out when the charging is
completed.
• If the indicator flashes quickly,
refer to
Troubleshooting
(
87).
1 Disconnect the compact power
adapter from the camcorder.
2 Unplug the power cord from the
power outletand the compact
power adapter.
1 Slide the battery compartment
cover away from the lens and
open it.
2 Press the battery release latch and
pull out the battery pack.
3 Close the cover and slide it toward
the lens until you hear a click.
IMPORTANT
• Turn off the camcorder before
connecting or disconnecting the
compact power adapter. After turning
off the camcorder, important data is
updated in the memory. Be sure to wait
until the ON/OFF(CHG) indicator turns
off.
• We recommend charging the battery
pack in temperatures between 10 °C
and 30 °C (50 °F and 86 °F). Outside the
temperature range of 0 °C to 40 °C
(32 °F to 104 °F), the charging will not
start.
• Do not connect to the camcorder’s DC
IN terminal or to the compact power
adapter any electrical equipment that is
not expressly recommended for use
with this camcorder.
O
NCE
THE
BATTERY
PACK
IS
FULLY
CHARGED
ON/OFF(CHG) indicator
T
O
REMOVE
THE
BATTERY
PACK
Battery release latch