4
Setting Up the Printer
9
Close the top cover.
10
Press the
OK
button.
•
The
ON
lamp flashes and the ink system preparation
starts. It takes about 5 minutes to complete.
Flashing
Proceed to the next page.
Count the number of flashes.
•
9 times
Protective material remaining.
"2. Removing Packing Materials" on page 1
•
4 times
Print heads are not installed correctly.
"3. Installing the Print Heads" on page 1
•
5 times
Print heads cannot be recognized.
"3. Installing the Print Heads" on page 1
•
The
ON
lamp and
Alarm
lamp flash alternately 8
times
Ink system preparation was not completed successfully.
Press the
ON
button to restart the printer, and then see "5.
Pouring Ink" on page 3.
For all other cases, refer to the
Online Manual
.
If the
Alarm
lamp flashes or lights