background image

24

E

Quic

k Over

vie

w

Turn the digital zoom on by choosing D.ZOOM from the camera menu, to magnify the camera’s zoom
range by up to 5

×

.

Zooming

Zoom in

Zoom out

T

W

ZOOM

W

T

40

×

/100

×

digital zoom

Operate the zoom controls from either the side grip, the camera handle or the wireless controller.
The camera’s 20

×

zoom lens allows you to choose the best picture angle for each scene:

• Press the zoom control towards W to zoom out to wide-angle.
• Press it towards T to zoom in to telephoto.

You can control the speed of zooming from the side grip:
• Press the control slightly to zoom slowly.
• Press it farther to zoom more quickly. (The farther you press the zoom control, the faster the zoom

speed.)

The T and W buttons on the wireless controller and the camera handle adjust the picture angle, but not the
zoom speed. Set the handle-top zoom control to one of three speeds. Open the camera menu and select
ZOOM HANDLE , then set it to LOW, MEDIUM or FAST. The speed of the zoom control on the
wireless controller cannot be adjusted.

20

×

optical zoom

The zoom control continues to work as usual. You can freely zoom in and out between 1

×

and 40

×

or 

1

×

and 100

×

magnification — the camera automatically switches between optical zooming (up to 20

×

)

and digital zooming (20

×

to 100

×

).

Notes:
• When zooming, as a rule, keep at least one meter between you and your subject. However when the

zoom is at the wide-angle position, you can focus on a subject as close as 3/8 in (1 cm).

• Image resolution decreases the further you zoom towards 100

× 

in digital zoom range.

• When the digital zoom is set to 40

×

, the zoom indicator extends (light blue). 

When the digital zoom is set to 100

× 

zoom, the zoom indicator extends again (a darker blue).

D.ZOOM¥¥¥¥¥¥40

×

(see p. 34)

Summary of Contents for GL1









































































































Reviews: