2
Installing the ROM DIMM
1) Insert the ROM DIMM into the slot at an
angle.
Figure 3-1022
2) Shift down the ROM DIMM.
• Shift it down in the direction of the arrow
until a click is heard.
Figure 3-1023
3) Install the removed covers, and connect the
power cord into the power outlet; then, turn on
the main power switch.
b. Downloading
■
■
Tools Required
• PC (The utility program for upgrading and
the new program to be written to the ROM
DIMM must have been installed in
advance.)
• RS232C cable
■
■
Downloading
1) Turn off the main power switch.
2) Open the front door, and remove the connec-
tor cover for servicing; connect the copier to
the PC with an RS232C cable.
Figure 3-1024
3)
Insert the handle of the separation static
eliminator cleaning brush into the fixing assem-
bly releasing assembly, and insert the door
switch actuator into the door switch assembly.
4) Turn on the main power switch. Then, press
the service switch, and press the * key twice.
5) Press ‘FUNCTION’ (*4*) on the screen to
highlight; then, press the OK key.
Cover
3–250
COPYRIGHT © 1996 CANON INC. CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING
