Canon GP215 Service Manual Download

Page: 338 / 458

5. Adjusting the Position of the Mirror (optical length of No. 1 mirror and No.

2/No. 3 mirror)

1) Prepare the mirror positioning tool.
2) Move the No. 1 mirror mount in the forward direction to match the hole in the front upper side plate and

the hole in the slide assembly of the No. 1 mirror mount and the No. 2 mirror mount. (Do the same for
the rear side plate.)

3) Set the mirror positioning tool to the No. 1 mirror mount and the No. 2 mirror mount (both front and

rear).

Figure 4-309

4) Tighten the set screw of the pulley.
5) Remove the tool.

For rear

No.1 mirror mount

No.2/No3 mirror mount

For front

4–12

4. MECHANICAL SYSTEM

Summary of Contents for GP215









































































































































































































































































































































































































































Search results

Summary of Contents for GP215

Reviews:

Related manuals for GP215

Brands by name

Popular brands

Canon GP215, Service Manual

Search results

Summary of Contents for GP215

Reviews:

Related manuals for GP215

Brands by name

Popular brands