Color Bubble Jet Printer
i
80
Series
Start Here
Easy Setup Instructions
IMPORTANT:
Be sure the printer
is off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
Continue with Step 6 on side two.
TURN THE PRINTER OFF.
Connect the one end of the USB
cable to the computer, the other
to the printer.
Slide the paper guide to the left.
Load a sheet of blank paper in the
paper rest. Slide the guide toward
the left edge of the paper.
USB
connection
USB
port
USB
Plug
DC
Plug
Paper
Guide
Click
Remove the BCI-15 Black Ink Tank
from its package.
You
MUST
remove the protective cap.
Insert the Black Ink Tank into the back slot.
Close the print head cover and move the
paper thickness lever to the right.
Using the procedure above, insert the Color
Ink Tank into the front slot.
Paper Thickness
Lever
Press on the area until the ink tank
clicks into place.
NOTE:
The printer will perform a print head
cleaning after the cover is closed. Wait until
the process is complete before proceeding.
Print Head
Cover
Remove the print head from its package.
Lower the lock lever until it clicks into place.
Nozzles
Press in on the lock button and lift the
gray lock lever.
Remove the protective cap from
the print head.
Tear at Notch
Click
NOTE:
Do not touch the print head nozzles.
Place the print head into the holder, by
aligning the mark with the mark.
Lift open the paper rest and
TURN THE
PRINTER ON
. The printer will initialize.
After the printer finishes initializing,
open the print head cover.
Plug the power cord into the AC adapter.
Connect the DC plug to the printer. Plug
the power cord into a power outlet.
Remove the shipping materials from
the printer.
Serial Number
Location
Power Cord
DC Plug
AC Adapter
Paper Output Slot Cover
Paper Rest
Paper Rest
Print Head
Cover
IMPORTANT:
Do not open the
cover before the printer has
finished initializing. Wait until the
POWER
lamp remains fully lit.
Carefully remove all items from the box.
Documentation
and Software Kit
Power Cord
AC Adapter
i
80
Series Print Head
i
80
Series Printer
BCI-15 Color
Ink Tank
BCI-15 Black
Ink Tank
1
2
3
4
1
2
4
5
1
3
1
2
3
4
5
6
1
2
3
2
Prepare the Printer
1
Unpack the Printer
3
Install the Print Head
4
Install the Ink Tanks
5
Connect Your Printer
and Load Paper
