DR-2010C / DR-2510C
DR-2010C / DR-2510C
35
The length of documents that can be scanned with the DR-2010C/DR-2510C is
normally 14.02" (356 mm), but you can scan documents up to 39.2" (1000 mm)
long by setting the scanner to the Long Document mode.
IMPORTANT
When scanning in the Long Document mode, click the [Basic] tab of the ISIS/
TWAIN driver properties dialog box and set the paper size to [Auto-detection] to
allow the scanner to detect and scan documents up to 39.2" (1,000 mm) long.
Note the following when using the Long Document mode:
•
When scanning in the Long Document mode, if the document is placed on
the scanner in a skewed position, it may hit the edges of the feeding area
and be damaged. Be careful to place the document so that it is not skewed.
•
When scanning with the Long Document mode, paper jam detection may
react slowly, resulting in damage to the document. Be careful to avoid paper
jams.
•
When scanning long documents, make sure to set the feed selection lever to
(Bypass), and scan the documents one at a time.
1
Click the [Start] button
→
[Control Panel].
2
Double-click [Scanners and Cameras].
3
Right-click [CANON DR-2010C USB] or [CANON DR-2510C USB]
→
click
[Properties].
Setting the Long Document Mode
7. Other Functions
7 Other Functions
7. Other Functions
