background image

ENG-11

Specifications

Focal Length & Max. Aperture

70 – 200 mm, f/4

Lens Construction

13 groups, 16 elements

Min. Aperture

f/32

Angle of View

Diagonal: 34° – 12°

Vertical: 19°30’ – 7°

Horizontal: 29° –10°

Min. Focusing Distance

1.2 m / 3.9 ft.

Max. Magnification & Field of view

0.21

× (

at 200 mm

)

, 300 

×

450 mm – 114 

×

171 mm/11.7 

×

17.6 inch – 4.46 

×

6.7 inch (at 1.2 m)

Filter Diameter

67 mm

Max. Diameter & Length

76 

×

172mm / 3.0 

×

6.8 inch

Weight

705 g / 24 oz

Lens Hood

ET-74

Lens Cap

E-67U/E-67 II

Case

LP1224

Tripod Collar (Sold separately)

Ring-type tripod mounting socket A II (W)

• The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm to include the 

E-67U lens cap and dust cap, and 24.2 mm for the E-67 II.

• The size and weight listed are for the lens only, except as indicated.
• There is no size available among 250D/500D close-up lenses.
• Aperture settings are specified on the camera.
• All data listed is measured according to Canon standards.
• Product specifications and appearance are subject to change without notice.

Summary of Contents for IMAGE STABILIZER EF70-200MM F/4L IS USM














Reviews: