3
Setting Specifications That Are Common to Each Function (Common Settings)
3-11
Selecting and Stor
ing Settings to Suit y
our Needs
Setting Entry Tone, Error Tone, and Job Done Tone
You can select whether or not to sound audible tones. The following tones sound at the
following times:
• Entry Tone: When pressing keys on the control panel or keys on the touch panel display.
• Error Tone: When a malfunction occurs (e.g., paper jam or operational error).
• Job Done Tone: After the last copy has been made (e.g., outputting, stapling, or faxing is
completed).
NOTE
•
The default setting is “On” for all tones.
1
Call up the desired screen as follows:
2
Select “On” or “Off” for Entry Tone, Error Tone, and Job Done Tone,
and press “OK.”
3
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
(Additional Functions)
Audible Tones
E1L_US_U_.book-INDEX Page 11 Wednesday, May 23, 2001 11:40 PM
Summary of Contents for imageCLASS 2200
Page 32: ...Operation of the Machine and Terms Used in This Manual xxxi...
Page 110: ......
