1
2
3
4
5
6
5-16
Copying Problems
Cannot make copies.
Q
Have you removed the sealing tape from the
toner cartridge?
A
Make sure you remove the sealing tape from the
cartridge. (See “Install Toner Cartridge,” in the
Starter Guide.)
Q
Is the toner cartridge installed properly?
A
Make sure the toner cartridge is installed properly.
(See “Install Toner Cartridge,” in the Starter Guide.)
A
Make sure the scanning platform and rear cover
are fully closed.
Q
Is the document loaded correctly?
A
Make sure the document is correctly loaded. (See
Chapter 2, “Document Handling,” in the Basic
Guide.)
Q
Does the document meet the requirements for
the machine?
A
Make sure you load documents that meet the
requirements for use. (See Chapter 2, “Document
Handling,” in the Basic Guide.)
The alarm sounds or <MEMORY FULL> appears in the LCD
when making copies.
Q
Has an error occurred during transmission or
reception?
A
Change to the fax mode and check the LCD for an
error message and solve the problem. (See
Chapter 11, “Troubleshooting,” in the Basic Guide.)
Q
Is the machine’s memory full?
A
Check remaining memory. (See “Checking
Remaining Memory,” on p. 3-3.)
